Walk-in shower
Tub-to-shower
Freestanding tub
Kohler
Moen
Delta
Frameless glassFree in-home design visit - walk-in showers, tub-to-shower conversions, and Kohler, Moen, and Delta fixtures planned to your exact space
Styles & brands we work with
- Walk-in shower
- Tub-to-shower
- Freestanding tub
- Kohler
- Moen
- Delta
- Frameless glass
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Paradise?
Tub-to-shower conversion in Paradise typically costs $3,500 to $10,000, with most homeowners landing somewhere in the middle of that range. A straightforward swap with a prefabricated pan and tile-look walls sits near the bottom; a fully waterproofed, custom-tiled walk-in shower with frameless glass and upgraded fixtures pushes toward the top. Every price we quote is an estimate, and the written estimate you receive after we look at your bathroom sets the final number.
That range is wider than most people expect, so this guide breaks it down line by line. You’ll see what drives the number up, what keeps it down, and where the money actually goes on a conversion in the Las Vegas Valley. If you’d rather skip ahead and get a real number for your bathroom, call (888) 349-5908 and we’ll set up a free estimate.
Key Takeaways
- Typical tub-to-shower conversion in Paradise: $3,500 to $10,000, estimated.
- The tub removal, drain relocation, and waterproofing are the hidden-work items that separate a lasting conversion from a leak waiting to happen.
- Schluter Systems waterproofing adds cost up front and protects the structure behind the tile for years.
- Fixture brand choice moves the total meaningfully: Sterling and American Standard at the value end, Kohler, Moen, and Delta in the middle, Toto and Grohe at the premium end.
- Free estimates, and the written estimate sets the final price.
Tub-to-Shower Conversion Cost Breakdown (2026)
Here’s how the money typically divides on a Paradise conversion. These are estimated ranges for the local market, not quotes.
| Line Item | Typical Estimated Range |
|---|---|
| Tub removal and disposal | $250 – $600 |
| Drain relocation and rough plumbing | $400 – $1,200 |
| Shower pan and substrate | $500 – $1,400 |
| Schluter waterproofing membrane and tile transitions | $400 – $900 |
| Wall tile and setting materials | $800 – $2,500 |
| Shower valve, trim, and fixture (brand-dependent) | $300 – $1,500 |
| Glass door or panel | $400 – $1,800 |
| Labor and finishing | $600 – $2,000 |
| Full conversion, all-in | $3,500 – $10,000 |
What pushes a conversion toward the top of that range? Custom tile work takes longer than a prefab surround, and the more cuts and transitions, the more labor. A drain that has to move far from the tub’s original position adds rough plumbing time. Frameless glass with a custom cut costs more than a standard panel. Premium fixtures from Toto or Grohe add at the top end, and a larger footprint means more material.
What keeps it lower? Keeping the drain near where it is, choosing a prefabricated pan and surround, and matching the new shower footprint to the old tub’s. A compact alcove conversion is the simplest job there is, and the price reflects it. If you’re weighing the shower itself against the wider project, our guide to walk-in shower installation covers what goes into the shower build specifically.
What Affects Tub-to-Shower Conversion Pricing in Paradise
- The plumbing underneath. A tub drains at one spot; a shower needs the drain centered and pitched correctly. Moving that drain is a real line item, and in Paradise’s older housing stock the plumbing you find once the tub comes out can shape the estimate. Sometimes it’s clean and straightforward. Sometimes it isn’t.
- Waterproofing method. This is where cheap conversions fail. We waterproof to Schluter standards because the desert swing between dry indoor air and heavy shower use is hard on wall assemblies. A bonded membrane and proper substrate cost more than a painted-on roll of red guard, and they’re worth it.
- Tile versus prefab. A prefabricated surround installs faster and costs less. Custom tile lets you build exactly the shower you want, with the bench, niche, and shelf placement that fits your space, but it’s slower and more skilled work.
- Fixture brand. We work with eight brands so the hardware fits your budget rather than the other way around. Sterling and American Standard keep the valve and trim cost down. Kohler, Moen, and Delta sit in the reliable middle. Toto and Grohe are the premium end, and they earn it in finish and function.
- Glass and door style. A framed sliding door, a single fixed panel, or a frameless swing door all change the number. Frameless glass is the biggest single cosmetic upgrade in the budget.
- Accessibility features. A curbless entry, a built-in bench, and grab bar blocking behind the tile add cost but make the shower safer to use for years. Many of our Paradise customers are making exactly this kind of aging-in-place upgrade, and it’s worth planning for it now rather than retrofitting later.
What a Tub-to-Shower Conversion Actually Involves
Knowing the sequence helps you read an estimate and spot where the money goes. It also helps you ask better questions when you compare quotes.
- Tear-out. The tub, surround, and any old wall material come out. This is where hidden problems surface: soft drywall, an old valve, a drain that needs reworking.
- Rough plumbing. The drain and valve get repositioned for the new shower. This is the step that most affects whether your final number lands low or high in the range.
- Substrate and waterproofing. Cement board or foam backer goes up, then the waterproofing membrane and the pan. Schluter Systems products handle the membrane, the drain bonding flange, and the tile transitions at the edges, which is the part most surface-level remodelers skip. Done right, water never reaches the framing.
- Tile and finish. Wall tile, floor tile, grout, and any niche or bench get set and finished.
- Fixture and glass. The valve trim, showerhead, and glass go in last.
If your existing shower is failing rather than your tub, our shower replacement guide covers that path instead, and the pricing differs. For a broader look at how a full bathroom project compares, the bathroom remodeling page lays out the full scope and cost range.
How to Save on Tub-to-Shower Conversion
There’s real money to be saved here without cutting into the parts that matter. A few practical ways to bring the number down:
- Keep the drain where it is. If your new shower can center on the existing drain location, you skip the rough plumbing line item entirely. Ask about this at the estimate.
- Choose a prefabricated pan. A molded pan and surround with a tile-look finish installs faster and costs less than custom tile while still looking clean and modern.
- Match the footprint to the tub. A drop-in shower sized to the old tub alcove means less framing, less tile, and less labor than expanding the opening.
- Pick a mid-range fixture brand. Kohler, Moen, and Delta give you solid performance and finish without the premium-tier price. This is often the smartest place to save.
- Skip the extras first, add them later. A glass panel instead of a frameless door, an off-the-shelf niche instead of a custom one, standard tile instead of a complex pattern. All of these lower the number without hurting the shower’s function.
- Don’t cut waterproofing. It’s tempting to trim here, but Schluter-backed waterproofing is the one place where saving short-term costs long-term. A failed pan means redoing the whole shower.
Every quote starts with a free estimate, so there’s no cost to finding out where your bathroom actually lands in the range. Call (888) 349-5908 to book one.
Repair or Replace: Is It Cheaper to Convert Than to Repair?
Often, yes. A failing tub or a shower surround with water damage behind it rarely makes sense to patch, because the money goes into the same hidden work a conversion needs. If you’re already opening the wall to fix a leak, a conversion reuses that investment. If the tub is sound and you simply don’t like it, a cosmetic refresh costs less, but it won’t fix an access or safety problem.
The decision usually comes down to what’s failing. Cracked or leaking pan? Convert. Old but watertight tub you’ve stopped using because it’s too hard to step into? Convert. Cosmetic-only complaint? Repair or refresh. We’ll tell you honestly which one your bathroom needs when we look at it.
Why Choose a Bathroom-Only Specialist for Your Conversion
Tub-to-shower conversion is a defined service for us, not an add-on squeezed between kitchen jobs. Every estimator, designer, and installer we work with is focused on bathrooms, so the plumbing, waterproofing, and tile details that make or break a conversion are the everyday conversation rather than the exception. There’s no subcontractor hand-off on a job like this. The same trade focus runs through the whole bathroom remodeling Paradise service, from a single shower to a full gut.
Our technicians have up to 15 years of experience, and we work with American Standard, Sterling, Kohler, Moen, Delta, Toto, Grohe, and Schluter Systems so the recommendations we make are matched to your budget rather than pushed toward one brand. When we specify a Grohe valve next to a Sterling pan, that’s a balance we chose for the job, not a default.
FAQs – Tub-to-Shower Conversion Cost
How much does a tub-to-shower conversion cost in Paradise?
A typical tub-to-shower conversion in Paradise runs $3,500 to $10,000, estimated, with the final number set by the written estimate. Most conversions fall in the middle of that range. Call (888) 349-5908 for a free estimate on your bathroom.
Is it cheaper to convert a tub to a shower or replace the whole bathroom?
A conversion is cheaper. Tub-to-shower conversion runs $3,500 to $10,000 while a full bathroom remodel runs $9,000 to $28,000, so if the tub is your main problem, a conversion keeps the rest of the room intact and the cost down. Call (888) 349-5908 and we’ll tell you which one your bathroom needs.
How much does a walk-in shower cost in Paradise?
A walk-in shower installation runs $4,500 to $12,000, estimated, and a shower replacement alone runs $3,000 to $8,500. A conversion usually sits below a full walk-in build because it works within the existing tub alcove. Call (888) 349-5908 for an exact figure.
Can you do a tub-to-shower conversion in a day?
Most conversions take more than one day because tear-out, plumbing, waterproofing, and tile each need their own stage, and the waterproofing has to cure properly before tile goes on. Same-day conversions of a simple prefab pan and surround are possible in some cases, but we won’t rush the waterproofing to hit a deadline. Call (888) 349-5908 to talk through your bathroom.
Does the estimate cost anything?
No, the estimate is free. We look at your bathroom, measure, and give you a written estimate that sets the final price. There’s no trip charge or fee to get it. Call (888) 349-5908. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, so we can usually get out to see your space quickly.
Get a Free Tub-to-Shower Conversion Estimate in Paradise
Your bathroom, built around how you actually live in it, starts with a real number. Whether you’re removing a tub you never use, making the shower safer to step into, or finally replacing a surround that’s been fighting you for years, the conversion is a defined scope and we can price it. Call (888) 349-5908 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician out to look at your bathroom and put a written estimate in your hands. The written estimate sets the final price, and there’s no cost to get it. If you’d like to see how we approach the wider Paradise market first, that’s the place to start.
Pricing reflects the Paradise market as of 2026. Bathroom Remodeling Paradise offers free estimates – call (888) 349-5908.
Written by the team at Bathroom Remodeling Paradise.
What Our Customers Say
"Three weeks, single bathroom, and they were finished on the day they said they would be."
- Priya Gupta"They waterproofed the shower properly with a membrane and did a flood test before a single tile went on. The last contractor who did a bathroom in this house did neither, which is why we were redoing it."
- Michelle Norris"Tile layout was planned so the cuts land in the corners rather than a sliver next to the door."
- Marisol Guzman